removing a combo switch

gresoul · #1 (**permalink**) 02-18-2008, 08:56 AM

a switch was pushed into a light/fan/heater combo switch in the bathroom and i cant seem to be able to open it, there are no visible screws as seen on the image. could you please let me know how it is removed.

dollinkepller · #2 (**permalink**) 07-31-2008, 10:25 AM

It is harmful as after its removal the combination of board will not be connected.

wilsonmian · #3 (**permalink**) 10-04-2008, 12:03 AM

I think this should be handled very carefully so don't try it until you are pretty familiar with all those circuits.

johnaydan · #4 (**permalink**) 10-06-2008, 11:27 AM

Hi Gresoul,

I would rather suggest you to either go for the hard way or call in a professional.... Shut the Mains off and crack it open from one convenient side...